Polymer Injection As a foundation repair method


foundation repair needs are dominant, and if necessary, immediately throughout the US Some homes are located in an earthquake zone, which means that even the smallest cracks, however, a disease of enormous proportions if the attention and expertise is not redirected, as it is noticed.

The Need For Foundation Repair

Most people believe that the concrete has a tendency to develop cracks, and it’s okay to leave the problem without supervision. This could not be further from the truth. While the foundations of homes to crack due to retirement or damage of the earthquake, you need to be addressed immediately. It is questions such as these:

  • There cracked walls at home?
  • These cracks large enough for a coin to fit through them?
  • you have doors that can only refuse to close it?
  • There are a convex floor and fattened?

If the answer to any of these questions is a yes, then it is best to contact a foundation repair contractor to as soon as possible. Other signs that improvement is needed in the foundation floor is uneven, separation walls, doors, leaning chimneys and cracks in tile or vinyl flooring.

Often foundation problems will not be easy to recognize, and it’s a good idea to consult with an experienced entrepreneur to acquire testing of a foundation. A qualified contractor know exactly where to look for damage and will be able to spot problems quickly and easily.

repair methods

Depending on the problem, you see, there are various repair methods can be used. Managing your symptoms do not improve with patching and filling a permanent solution to the problems of soil settlement. Eventually, people will learn that it is necessary to correct the cause of the problem is structural. The most common of all such methods Polymer Injection.

Polymer injection and soil stabilization process similar to jacking mudjacking. The main difference is that instead of pumping a cement slurry into the soil, a polymer-based foam blowing agent was injected. The two-part polymer starts to rotate in a liquid into a foam, as the two components are mixed with the application nozzle. Polymer injection can be performed directly beneath a permanent structural element, or a depth of 30 ft .. based on the penetrometer tests to assess the density of the soil, technicians created an injection grid to specific locations where the polymer should be placed. Holes are drilled in the plate or other structural element according to the injection grid; then the length of tubing is inserted into each hole. The length of the pipes depends on a variety of injection was set up.

Someone you can trust

The correct method can prescribe you a local foundation repair contractor. You can also get reliable and easy to use information on how to prevent basic problems in the future. Remember, foundation problems will not magically fix itself overnight, and it will only get worse. This is why there is a need for immediate action to fix the foundation problem once and for all.


Source by Samantha Walton

Leave a Reply

Your email address will not be published. Required fields are marked *